Products

AQLAC Wood Putty (Water Base)

AQLAC Wood Putty (Water Base) Image

DESCRIPTION

Causeway Aqlac Wood Putty is a water based, environmental friendly product which can be used to fill up defects on the wooden surfaces with excellent adhesion properties.

A water base Acrylic filler for filling and shaping of  small dents or smooth out uneven surfaces.

  • Easy to Apply
  • High Durability
  • Interior & Exterior
  • Non shrinking
  • Fast drying
  • Easy sanding
  • Excellent applicability

TYPICAL USES

Filling and shaping of dents, uneven surfaces on the wood panel.

For the decoration of interior wall such as shaping or filling up dents, smooth out uneven surfaces.

APPLICATION

  • Fill up the defects on the wood using Causeway Aqlac Wood Putty.
  • Allow 2-6 hours drying time and sand the excess putty to get an even finish.
  • After completely dried up sand the putty with 180 grit sand paper and apply WB wood stain, lacquer as required.
  • All the used technical equipment can be easily clean with hot water.

Note : Number of application & drying time depend on depth & dimension of the defects, temperature and humidity in environment. (Best to keep 24 hours)

 

  • Method of Application
  • Scraper
  • Trowel

SURFACE PREPERATION

  • Surface must be clear, dry and sound. Joint Tape could be used to reinforce the joint before application.

APPLICATION INSTRUCTIONS

  • Product is ready for use.

AQLAC Wood Putty (Water Base)

AQLAC Wood Putty (Water Base) Image

DESCRIPTION

Causeway Aqlac Wood Putty is a water based, environmental friendly product which can be used to fill up defects on the wooden surfaces with excellent adhesion properties.

A water base Acrylic filler for filling and shaping of  small dents or smooth out uneven surfaces.

  • Easy to Apply
  • High Durability
  • Interior & Exterior
  • Non shrinking
  • Fast drying
  • Easy sanding
  • Excellent applicability

TYPICAL USES

Filling and shaping of dents, uneven surfaces on the wood panel.

For the decoration of interior wall such as shaping or filling up dents, smooth out uneven surfaces.

APPLICATION

  • Fill up the defects on the wood using Causeway Aqlac Wood Putty.
  • Allow 2-6 hours drying time and sand the excess putty to get an even finish.
  • After completely dried up sand the putty with 180 grit sand paper and apply WB wood stain, lacquer as required.
  • All the used technical equipment can be easily clean with hot water.

Note : Number of application & drying time depend on depth & dimension of the defects, temperature and humidity in environment. (Best to keep 24 hours)

 

  • Method of Application
  • Scraper
  • Trowel

SURFACE PREPERATION

  • Surface must be clear, dry and sound. Joint Tape could be used to reinforce the joint before application.

APPLICATION INSTRUCTIONS

  • Product is ready for use.