Products
AQLAC Wood Stain (Water Base)

DESCRIPTION
Causeway Aqlac Wood Stain is a water base preservative stain suitable for protecting tannin-rich when used outdoors and indoors. Made using transparent iron oxides which provide good light fastness and also absorb UV radiation. It is specially developed to impart uniform colour to the wooden surface, and at the same time provide depth, clarity and tone to emphasize the underlying wood texture.
- UV Resistant (Does not Fade)
- Quick Drying
- Natural Transparent Colour
- VOC Free, Environment Friendly, Water-based & Odourless
TYPICAL USES
- Wood furniture’s, doors, cabinets etc.
- Interior & exterior Wooden Surfaces
APPLICATION INSTRUCTIONS
Surface Preparation | Stain Coat | Drying | Sanding | Second Stain
Coat |
Drying | Sanding |
Sand wood up to 180 grit sand paper
(80, 120,180) |
Stir well and apply one coat of Causeway Aqlac water based wood stain. | 1 – 4 hours (Longer the better. Since drying time depend on environmental climate and temperature | Sand very lightly with 320 grit sand paper and clean the surface well. | Stir well and apply 2nd coat of Causeway Aqlac water based wood stain. | 1 – 4 hours (Longer the better. Since drying time dependent
environmental climate and temperature). |
Sand very lightly with 800 grit sand paper and clean the surface well. |
- Previously Painted surface: restore the surface to bare wood by completely removing the old coating and follow the above application instructions.
- Apply well sanded, smooth finish bare wood surface
- Method of application
- Brush
- Spray
DO NOT SHAKE BEFORE USE AND STIR UNDER SLOW AGITATION.
HEALTH & SAFETY
Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting.
AQLAC Wood Stain (Water Base)

DESCRIPTION
Causeway Aqlac Wood Stain is a water base preservative stain suitable for protecting tannin-rich when used outdoors and indoors. Made using transparent iron oxides which provide good light fastness and also absorb UV radiation. It is specially developed to impart uniform colour to the wooden surface, and at the same time provide depth, clarity and tone to emphasize the underlying wood texture.
- UV Resistant (Does not Fade)
- Quick Drying
- Natural Transparent Colour
- VOC Free, Environment Friendly, Water-based & Odourless
TYPICAL USES
- Wood furniture’s, doors, cabinets etc.
- Interior & exterior Wooden Surfaces
APPLICATION INSTRUCTIONS
Surface Preparation | Stain Coat | Drying | Sanding | Second Stain
Coat |
Drying | Sanding |
Sand wood up to 180 grit sand paper
(80, 120,180) |
Stir well and apply one coat of Causeway Aqlac water based wood stain. | 1 – 4 hours (Longer the better. Since drying time depend on environmental climate and temperature | Sand very lightly with 320 grit sand paper and clean the surface well. | Stir well and apply 2nd coat of Causeway Aqlac water based wood stain. | 1 – 4 hours (Longer the better. Since drying time dependent
environmental climate and temperature). |
Sand very lightly with 800 grit sand paper and clean the surface well. |
- Previously Painted surface: restore the surface to bare wood by completely removing the old coating and follow the above application instructions.
- Apply well sanded, smooth finish bare wood surface
- Method of application
- Brush
- Spray
DO NOT SHAKE BEFORE USE AND STIR UNDER SLOW AGITATION.
HEALTH & SAFETY
Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting.
