Products

« Back to Catalogue

Aqlac 3 in 1 Top Coat

Aqlac 3 in 1 Top Coat Image

DESCRIPTION

Causeway AQLAC 3in1 Top Coat Exterior combines rich wood stain colour and long protection to your wood in one-step conveniently.

Recommended for Exterior Doors & Windows, Exterior Furniture, Wooden Decks & Sunbeds in resorts.

  • Economical
  • Water Repellent
  • UV Resistant

3 in 1 (Time Saving)

  • Seal
  • Stain
  • Topcoat

SURFACE PREPARATION

For Previously Stained Wood That Is Not Being Stripped

  1. Before starting, surface must be dry, clean and free of dirt, grease and glue.
  2. Sand the wood with 180-320 grit Sandpaper to ensure adhesion. Remove all sanding dust.

For Stripped, Unstained or Raw Wood

  1. Before starting, surface must be dry, clean and free of dirt, grease and glue.
  2. Sand the wood in the direction of the grain 180-320 grit sandpaper until smooth. Remove all sanding dust.
  • Fill gaps and defects using AQLAC Wood Putty and sand after dry to get uniform finish.

APPLICATION

1st Coat

Stir Well (Do not Shake) the Aqlac 3in1 top coat and Apply the first coat with 5% water dilution.

Let Dry 4 Hours, Sand with 800 grit Sandpaper

 2nd Coat

Apply the second coat (do not dilute).

Let Dry 4 Hours.

 3rd Coat (if necessary)

Sand    with    800     grit     Sandpaper.

Apply  the  third    coat    (do not dilute).

Let   Dry  24   hours    before   handling.

(48 hours prior stacking)

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting.

« Back to Catalogue

Aqlac 3 in 1 Top Coat

Aqlac 3 in 1 Top Coat Image

DESCRIPTION

Causeway AQLAC 3in1 Top Coat Exterior combines rich wood stain colour and long protection to your wood in one-step conveniently.

Recommended for Exterior Doors & Windows, Exterior Furniture, Wooden Decks & Sunbeds in resorts.

  • Economical
  • Water Repellent
  • UV Resistant

3 in 1 (Time Saving)

  • Seal
  • Stain
  • Topcoat

SURFACE PREPARATION

For Previously Stained Wood That Is Not Being Stripped

  1. Before starting, surface must be dry, clean and free of dirt, grease and glue.
  2. Sand the wood with 180-320 grit Sandpaper to ensure adhesion. Remove all sanding dust.

For Stripped, Unstained or Raw Wood

  1. Before starting, surface must be dry, clean and free of dirt, grease and glue.
  2. Sand the wood in the direction of the grain 180-320 grit sandpaper until smooth. Remove all sanding dust.
  • Fill gaps and defects using AQLAC Wood Putty and sand after dry to get uniform finish.

APPLICATION

1st Coat

Stir Well (Do not Shake) the Aqlac 3in1 top coat and Apply the first coat with 5% water dilution.

Let Dry 4 Hours, Sand with 800 grit Sandpaper

 2nd Coat

Apply the second coat (do not dilute).

Let Dry 4 Hours.

 3rd Coat (if necessary)

Sand    with    800     grit     Sandpaper.

Apply  the  third    coat    (do not dilute).

Let   Dry  24   hours    before   handling.

(48 hours prior stacking)

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting.