Products
Causeway Plastering Compound Wall Putty

DESCRIPTION
Causeway Wall Putty is recommended to apply on rough masonry surfaces to fill up cracks, dents, holes and unevenness. It is easy to sanding and help to prepare the wall as smooth and durable before painting.
A water base Acrylic filler for filling small dents or smooth out uneven surfaces.
- Excellent applicability
- Low shrinkage
- Quick drying
- Easy sanding
TYPICAL USES
For the decoration of interior wall such as shaping or filling up dents, smooth out uneven surfaces.
- Asbestos
- Cement
- Masonry
- Plaster
- Brickworks Hard & Soft Boards
- Wood
APPLICATION
- Method of Application
- Scraper
- Trowel
SURFACE PREPARATION
- Surface must be clear, dry and sound. Joint Tape could be used to reinforce the joint before application.
APPLICATION INSTRUCTIONS
- Product is ready for use.
- Apply With a clean dry roller or a brush.
- Dilute With 30% – 40% of Water. Dilute as required which is
- suitable for finish of the surface. (Do not over dilute)
- Recoating interval – minimum 30 min. if necessary.
- Apply 2-3 coats of Causeway Emulsion paint for finishing.
Causeway Plastering Compound Wall Putty

DESCRIPTION
Causeway Wall Putty is recommended to apply on rough masonry surfaces to fill up cracks, dents, holes and unevenness. It is easy to sanding and help to prepare the wall as smooth and durable before painting.
A water base Acrylic filler for filling small dents or smooth out uneven surfaces.
- Excellent applicability
- Low shrinkage
- Quick drying
- Easy sanding
TYPICAL USES
For the decoration of interior wall such as shaping or filling up dents, smooth out uneven surfaces.
- Asbestos
- Cement
- Masonry
- Plaster
- Brickworks Hard & Soft Boards
- Wood
APPLICATION
- Method of Application
- Scraper
- Trowel
SURFACE PREPARATION
- Surface must be clear, dry and sound. Joint Tape could be used to reinforce the joint before application.
APPLICATION INSTRUCTIONS
- Product is ready for use.
- Apply With a clean dry roller or a brush.
- Dilute With 30% – 40% of Water. Dilute as required which is
- suitable for finish of the surface. (Do not over dilute)
- Recoating interval – minimum 30 min. if necessary.
- Apply 2-3 coats of Causeway Emulsion paint for finishing.
