Products
Causeway Stoving Primer
DESCRIPTION
Causeway Industrial Stoving Primer is a alkyd/urea-Melamine or Acrylic / Melamine based stoving primer coating. It provide excellent adhesion over previous old paint film.
- Excellent Adhesion
- Excellent Coverage.
- Anti Corrosive properties
- Excellent Hardness
- Abrasion Resistant properties.
TYPICAL USES
- Suitable as baking primer on metal surface
- Steel Cupboards
- Bicycles
- Wheels & Rims
- Hinges
APPLICATION
- Method of application
- Spray
- Dipping
SURFACE PREPERATION
- Use mechanical blasting or electrical sanding to remove any coated material or oxide layers on the surface.
- Remove any dust, oil and other foreign contaminants that may affect adhesion properties by hand or power tools.
- For aluminium & galvanized steel use Causeway Etch primer before applying the primer.
APPLICATION INSTRUCTIONS
- Mix the contents in the container thoroughly before use.
- Adjust the viscosity of the primer with recommended thinner to the required viscosity.
- Allow 5 minutes flash off time between subsequent coatings.
STORAGE INSTRUCTIONS
- Store at a cool dry place (@ room temperature /250C).
- Avoid direct sunlight & heat from other heating sources
HEALTH & SAFETY
Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.
Causeway Stoving Primer
DESCRIPTION
Causeway Industrial Stoving Primer is a alkyd/urea-Melamine or Acrylic / Melamine based stoving primer coating. It provide excellent adhesion over previous old paint film.
- Excellent Adhesion
- Excellent Coverage.
- Anti Corrosive properties
- Excellent Hardness
- Abrasion Resistant properties.
TYPICAL USES
- Suitable as baking primer on metal surface
- Steel Cupboards
- Bicycles
- Wheels & Rims
- Hinges
APPLICATION
- Method of application
- Spray
- Dipping
SURFACE PREPERATION
- Use mechanical blasting or electrical sanding to remove any coated material or oxide layers on the surface.
- Remove any dust, oil and other foreign contaminants that may affect adhesion properties by hand or power tools.
- For aluminium & galvanized steel use Causeway Etch primer before applying the primer.
APPLICATION INSTRUCTIONS
- Mix the contents in the container thoroughly before use.
- Adjust the viscosity of the primer with recommended thinner to the required viscosity.
- Allow 5 minutes flash off time between subsequent coatings.
STORAGE INSTRUCTIONS
- Store at a cool dry place (@ room temperature /250C).
- Avoid direct sunlight & heat from other heating sources
HEALTH & SAFETY
Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.
Causeway Paint Lanka (Pvt) Limited is a Singapore – Sri Lanka joint ventue that was approved in 1994 by the Board of Investments of Sri Lanka for domestic and offshore business. 
