Products

Star Class 2K Primer Surfacer (4 - 1)

Star Class 2K Primer Surfacer (4 - 1) Image

DESCRIPTION

Starclass 2K Primer Surfacer (4:1) is a two component high solid polyurethane acrylic primer with excellent anti-corrosive properties. This can be easily sanded with abrasive paper for a smooth finish. This will also level out minor irregularities in the substrate and improves adhesion of the top coat. Recommended to be used as a primer for automotive refinish & other various industries.

  • Anti-corrosive
  • Excellent Adhesion
  • Abrasion Resistant Properties
  • Bonds to Zinc, Aluminium & Galvanized Steel surface

TYPICAL USES

Used as the primer for

  • Auto refinish.
  • Steel structures (buildings/ bridges)
  • Petroleum refineries/ oil tanks
  • Power plants/ Marine installations/ Pipelines

APPLICATION

  • Method of application
    • Spray (2 Double Coats)
    • Brush

SURFACE PREPERATION

  • Use mechanical blasting or electrical sanding to remove any coated material or oxide layers on the surface.
  • Remove any dust, oil and other foreign contaminants that may affect adhesion properties by hand or power tools.

APPLICATION INSTRUCTIONS

  • Mix the contents in the primer thoroughly before use.
  • Mix the 2K primer and 2K hardener together thoroughly before application.
  • Adjust the viscosity of the paint with the thinner to the required viscosity depending on the method of application used.
  • Allow 5-10 minutes flash off time between subsequent coatings.
  • Sand down using 800P & 1500P grade sand paper. after 3-4 hours.
  • Keep it overnight before applying a top coat.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.

Star Class 2K Primer Surfacer (4 - 1)

Star Class 2K Primer Surfacer (4 - 1) Image

DESCRIPTION

Starclass 2K Primer Surfacer (4:1) is a two component high solid polyurethane acrylic primer with excellent anti-corrosive properties. This can be easily sanded with abrasive paper for a smooth finish. This will also level out minor irregularities in the substrate and improves adhesion of the top coat. Recommended to be used as a primer for automotive refinish & other various industries.

  • Anti-corrosive
  • Excellent Adhesion
  • Abrasion Resistant Properties
  • Bonds to Zinc, Aluminium & Galvanized Steel surface

TYPICAL USES

Used as the primer for

  • Auto refinish.
  • Steel structures (buildings/ bridges)
  • Petroleum refineries/ oil tanks
  • Power plants/ Marine installations/ Pipelines

APPLICATION

  • Method of application
    • Spray (2 Double Coats)
    • Brush

SURFACE PREPERATION

  • Use mechanical blasting or electrical sanding to remove any coated material or oxide layers on the surface.
  • Remove any dust, oil and other foreign contaminants that may affect adhesion properties by hand or power tools.

APPLICATION INSTRUCTIONS

  • Mix the contents in the primer thoroughly before use.
  • Mix the 2K primer and 2K hardener together thoroughly before application.
  • Adjust the viscosity of the paint with the thinner to the required viscosity depending on the method of application used.
  • Allow 5-10 minutes flash off time between subsequent coatings.
  • Sand down using 800P & 1500P grade sand paper. after 3-4 hours.
  • Keep it overnight before applying a top coat.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.