Products

Sunny Sanding Sealer (Clear Colours)

Sunny Sanding Sealer (Clear Colours) Image

DESCRIPTION

Sunny Wood care Sanding Sealer is a premium quality high solid nitro-cellulose (NC) based sanding sealer It has been specially formulated to provide a quick drying and easily sanded sealer for wood.

  • High Solid
  • High Build
  • Excellent Sanding

TYPICAL USES

  • NC Sanding Sealer is applicable for solid wood, MDF, rattan and veneered furniture & wall paneling.
  • NC sanding sealer provides a quality sealer for timber wall paneling, office desks, chairs, cabinets and other items of quality furniture.

APPLICATION

  • Apply over prepared surfaces
  • Method of application
  • Conventional Spray
  • Brush

EQUIPMENT GUIDE

  • Suction Guns

1.8mm fluid tip at 350 kpa (50-55 psi) air pressure

  • Pressure Pots

1.5mm fluid tip with dedicated pot pressure air cap at 350 kpa air pressure and pot pressure of 45 kpa (6 psi)

  • Airless

9 – 13 thou fluid tip size and pump regulated to 400 kpa (50-60 psi). Viscosity dependent.

  • Air Assisted Airless

9 – 13 thou fluid tip size and pump regulated to 400 kpa (50-60 psi) with air assist regulated at 70 to 90 kpa (10-15 psi). Viscosity dependent.

  • Curtain Coating

Check suitability of equipment and ensure viscosity is maintained at 15-25 sec. with regular addition of NC Thinner to maintain operational viscosity.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.

Sunny Sanding Sealer (Clear Colours)

Sunny Sanding Sealer (Clear Colours) Image

DESCRIPTION

Sunny Wood care Sanding Sealer is a premium quality high solid nitro-cellulose (NC) based sanding sealer It has been specially formulated to provide a quick drying and easily sanded sealer for wood.

  • High Solid
  • High Build
  • Excellent Sanding

TYPICAL USES

  • NC Sanding Sealer is applicable for solid wood, MDF, rattan and veneered furniture & wall paneling.
  • NC sanding sealer provides a quality sealer for timber wall paneling, office desks, chairs, cabinets and other items of quality furniture.

APPLICATION

  • Apply over prepared surfaces
  • Method of application
  • Conventional Spray
  • Brush

EQUIPMENT GUIDE

  • Suction Guns

1.8mm fluid tip at 350 kpa (50-55 psi) air pressure

  • Pressure Pots

1.5mm fluid tip with dedicated pot pressure air cap at 350 kpa air pressure and pot pressure of 45 kpa (6 psi)

  • Airless

9 – 13 thou fluid tip size and pump regulated to 400 kpa (50-60 psi). Viscosity dependent.

  • Air Assisted Airless

9 – 13 thou fluid tip size and pump regulated to 400 kpa (50-60 psi) with air assist regulated at 70 to 90 kpa (10-15 psi). Viscosity dependent.

  • Curtain Coating

Check suitability of equipment and ensure viscosity is maintained at 15-25 sec. with regular addition of NC Thinner to maintain operational viscosity.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.