Products

Causeway Timbersheen Varnish

Causeway Timbersheen Varnish Image

DESCRIPTION

Causeway Timber Sheen is a Polyurethane modified alkyd based varnish with attractive, glossy durable finish. Available in wood shades of Teak, Mahogany and Jack wood.

  • Protects Against Stains
  • Resists Scratches & Scuffs
  • Enhances Durability

TYPICAL USES

On all interior and exterior woodwork either domestic or industrial. Ideal for stained timber, wall boards and maintenance of previously varnished surfaces, and most general varnishing situations.Ideal for use on window frames, doors, bookcases, shelves and skirting boards.

APPLICATION

  • Application method
  • Conventional spray, airless and air assisted spray
  • Brush application also possible

SURFACE PREPARATION

  • Ensure surfaces are clean, dry and free from dirt, grease and other contamination.
  • On new wood, sand surface and dust off.
  • Old varnished areas should be stripped well back then treated as new wood.

APPLICATION INSTRUCTIONS

  • Do not apply in a dusty environment.
  • Thin first coat up to 30% by mineral turpentine.
  • Apply by brush. Allow to dry for 16 hours.
  • Successive coats should be applied as supplied or may be thinned up to 15% with mineral turpentine.
  • Apply at least 3 coats of varnish to new wood.
  • Sand lightly between coats with 400 grit sandpaper. Dust off.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.

Causeway Timbersheen Varnish

Causeway Timbersheen Varnish Image

DESCRIPTION

Causeway Timber Sheen is a Polyurethane modified alkyd based varnish with attractive, glossy durable finish. Available in wood shades of Teak, Mahogany and Jack wood.

  • Protects Against Stains
  • Resists Scratches & Scuffs
  • Enhances Durability

TYPICAL USES

On all interior and exterior woodwork either domestic or industrial. Ideal for stained timber, wall boards and maintenance of previously varnished surfaces, and most general varnishing situations.Ideal for use on window frames, doors, bookcases, shelves and skirting boards.

APPLICATION

  • Application method
  • Conventional spray, airless and air assisted spray
  • Brush application also possible

SURFACE PREPARATION

  • Ensure surfaces are clean, dry and free from dirt, grease and other contamination.
  • On new wood, sand surface and dust off.
  • Old varnished areas should be stripped well back then treated as new wood.

APPLICATION INSTRUCTIONS

  • Do not apply in a dusty environment.
  • Thin first coat up to 30% by mineral turpentine.
  • Apply by brush. Allow to dry for 16 hours.
  • Successive coats should be applied as supplied or may be thinned up to 15% with mineral turpentine.
  • Apply at least 3 coats of varnish to new wood.
  • Sand lightly between coats with 400 grit sandpaper. Dust off.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.