Products

Causeway Polyurethane Varnish- Gloss Satin

Causeway Polyurethane Varnish- Gloss Satin Image

DESCRIPTION

Causeway PU Varnish is a polyurethane modified alkyd based convenient single clear coating which protects and enhances timbers natural characteristics. Ideal for stained timber, wall boards, frames furniture & most general varnishing system. Available in gloss & satin finish.

  • Extra Hardness
  • Improved Water and Moisture resistance

TYPICAL USES

On all interior and exterior woodwork either domestic or industrial. Ideal for stained timber, wall boards and maintenance of previously varnished surfaces, and most general varnishing situations.Ideal for use on window frames, doors, bookcases, shelves and skirting boards.

APPLICATION

  • Application method
  • Conventional spray, airless and air assisted spray
  • Brush application also possible

SURFACE PREPARATION

  • Ensure surfaces are clean, dry and free from dirt, grease and other contamination.
  • On new wood, sand surface and dust off.
  • Old varnished areas should be stripped well back then treated as new wood.

APPLICATION INSTRUCTIONS

  • Do not apply in a dusty environment.
  • Thin first coat up to 30% by mineral turpentine.
  • Apply by brush. Allow to dry for 16 hours.
  • Successive coats should be applied as supplied or may be thinned up to 15% with mineral turpentine.
  • Apply at least 3 coats of varnish to new wood.
  • Sand lightly between coats with 150 grit sandpaper. Dust off.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.

Causeway Polyurethane Varnish- Gloss Satin

Causeway Polyurethane Varnish- Gloss Satin Image

DESCRIPTION

Causeway PU Varnish is a polyurethane modified alkyd based convenient single clear coating which protects and enhances timbers natural characteristics. Ideal for stained timber, wall boards, frames furniture & most general varnishing system. Available in gloss & satin finish.

  • Extra Hardness
  • Improved Water and Moisture resistance

TYPICAL USES

On all interior and exterior woodwork either domestic or industrial. Ideal for stained timber, wall boards and maintenance of previously varnished surfaces, and most general varnishing situations.Ideal for use on window frames, doors, bookcases, shelves and skirting boards.

APPLICATION

  • Application method
  • Conventional spray, airless and air assisted spray
  • Brush application also possible

SURFACE PREPARATION

  • Ensure surfaces are clean, dry and free from dirt, grease and other contamination.
  • On new wood, sand surface and dust off.
  • Old varnished areas should be stripped well back then treated as new wood.

APPLICATION INSTRUCTIONS

  • Do not apply in a dusty environment.
  • Thin first coat up to 30% by mineral turpentine.
  • Apply by brush. Allow to dry for 16 hours.
  • Successive coats should be applied as supplied or may be thinned up to 15% with mineral turpentine.
  • Apply at least 3 coats of varnish to new wood.
  • Sand lightly between coats with 150 grit sandpaper. Dust off.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.