Products

Kenlux General Purpose Varnish

Kenlux General Purpose Varnish Image

DESCRIPTION

Causeway Kenlux G.P. Varnish is a general purpose varnish formulated economically, which can be applied on wood and metal.

  • Weather Resistance
  • Flexibility
  • Lead safe
  • Attractive gloss

TYPICAL USES

Recommended for general household furniture

APPLICATION

  • Application method
  • Conventional spray, airless and air assisted spray
  • Brush application also possible

SURFACE PREPARATION

  • Ensure surfaces are clean, dry and free from dirt, grease and other contamination.
  • On new wood, sand the surface and dust off.
  • Old varnished areas should be stripped well back then treated as new wood.

APPLICATION INSTRUCTIONS

  • Do not apply in a dusty environment.
  • Thin first coat up to 30% by mineral turpentine.
  • Apply by brush. Allow to dry for 16 hours.
  • Successive coats should be applied as supplied or may be thinned up to 15% with mineral turpentine.
  • Apply at least 3 coats of varnish to new wood.
  • Sand lightly between coats with 400 grit sandpaper. Dust off.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.

Kenlux General Purpose Varnish

Kenlux General Purpose Varnish Image

DESCRIPTION

Causeway Kenlux G.P. Varnish is a general purpose varnish formulated economically, which can be applied on wood and metal.

  • Weather Resistance
  • Flexibility
  • Lead safe
  • Attractive gloss

TYPICAL USES

Recommended for general household furniture

APPLICATION

  • Application method
  • Conventional spray, airless and air assisted spray
  • Brush application also possible

SURFACE PREPARATION

  • Ensure surfaces are clean, dry and free from dirt, grease and other contamination.
  • On new wood, sand the surface and dust off.
  • Old varnished areas should be stripped well back then treated as new wood.

APPLICATION INSTRUCTIONS

  • Do not apply in a dusty environment.
  • Thin first coat up to 30% by mineral turpentine.
  • Apply by brush. Allow to dry for 16 hours.
  • Successive coats should be applied as supplied or may be thinned up to 15% with mineral turpentine.
  • Apply at least 3 coats of varnish to new wood.
  • Sand lightly between coats with 400 grit sandpaper. Dust off.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks.