Products

Causeway Road Marking Paint

Causeway Road Marking Paint Image

DESCRIPTION

Causeway Road Marking Paint is specially formulated for marking of Road Lines. Dilute with Causeway thinner if necessary. (Solvent Base)

  • Highly Durable Marking
  • Excellent Adhesion
  • Durability against Abrasion.
  • Good Water Resistance.
  • Fast Drying.
  • Good Diesel fuel Resistance.

TYPICAL USES

  • Used for road marking Requirements
  • Asbestos
  • Masonry / Cement
  • Plaster
  • Brickworks Hard & Soft Boards
  • Ferrous Metal surface

APPLICATION

  • Apply over road surfaces
  • Method of application
  • Roller
  • Brush

APPLICATION INSTRUCTIONS

  • Remove any dust, oil and other contaminants that may affect its adhesive property.
  • Ensure that all loose old paint flakes are removed before any application of the paint.
  • Dilute the paint to the required viscosity, depending on the type of application method employed.
  • Roll 2 ~ 3 coats of road marking paint  allowing about 20 min of flash off time between each coat.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks

Causeway Road Marking Paint

Causeway Road Marking Paint Image

DESCRIPTION

Causeway Road Marking Paint is specially formulated for marking of Road Lines. Dilute with Causeway thinner if necessary. (Solvent Base)

  • Highly Durable Marking
  • Excellent Adhesion
  • Durability against Abrasion.
  • Good Water Resistance.
  • Fast Drying.
  • Good Diesel fuel Resistance.

TYPICAL USES

  • Used for road marking Requirements
  • Asbestos
  • Masonry / Cement
  • Plaster
  • Brickworks Hard & Soft Boards
  • Ferrous Metal surface

APPLICATION

  • Apply over road surfaces
  • Method of application
  • Roller
  • Brush

APPLICATION INSTRUCTIONS

  • Remove any dust, oil and other contaminants that may affect its adhesive property.
  • Ensure that all loose old paint flakes are removed before any application of the paint.
  • Dilute the paint to the required viscosity, depending on the type of application method employed.
  • Roll 2 ~ 3 coats of road marking paint  allowing about 20 min of flash off time between each coat.

HEALTH & SAFETY

Always keep paint out of reach of children. Ensure good ventilation during application and drying. Do not smoke while painting. Highly flammable. Store in a cool dry place away from heat and sparks